beautypg.com

English – Reloop IQ2 MIDI User Manual

Page 34

background image

ENGLISH

33

Depending on the effect, the time parameter‘s type and interval and the adjustments according to
the beat assignment buttons -24-, will differ.

> ECHO = echo effect
Continuously repeats a certain interval of the signal.

Time parameter value:

2 – 2000 msec

Direct bar assignment:

Intervals adjustable from 125 – 2000

By turning the X parameter knob -25- the value will be changed in steps of 1. Push, hold and turn the
X parameter knob -25- and the value will be changed in steps of 100.
Y parameter dry/wet value: 0 - 100%

> AUTO PAN = panorama effect
Produces the signal‘s continuous fading of the signal from the left to the right channel and back
again.

Time parameter value:

30 – 65000 msec

Direct bar assignment:

500/1000/2000/4000/8000/16000 msec

By turning the X parameter knob -25- the value will be changed in steps of 1. Push, hold and turn the
X parameter knob -25- and the value will be changed in steps of 100.
Y parameter dry/wet value: 0 - 100%

> FLANGER = flanger effect
Doubles the signal and shifts it by a marginal value.

Time parameter value: 100 – 65000 msec
Direct bar assignment: 500/1000/2000/4000/8000/16000
By turning the X parameter knob -25- the value will be changed in steps of 1. Push, hold and turn the
X parameter knob -25- and the value will be changed in steps of 100.
Y parameter dry/wet value: 0 – 100%

> MANUAL FILTER = HiPass/LowPass filter effect
With this effect you can manually control a Hipass and LowPass filter effect respectively.

Time parameter value:

LowPass 0.05 – 20.2 kHz / HiPass 0.13 – 21.1 kHz

Direct bar assignment:

LowPass 0.45/2.27/7.13/18.4 kHz – HiPass 1.63/5.73 kHz

By turning the Xparameter knob -25- the value will be changed in steps from 0.2 – 0.4. Push, hold
and turn the Xparameter button -25- and the value will be changed in steps of 0.1.

> AUTO FILTER = HiPass/LowPass filter effect
Filters high and low frequencies alternately according to the adjusted bar value.

Time parameter value:

100 – 65000 msec

Direct bar assignment:

500/1000/2000/4000/8000/16000 msec

By turning the X parameter knob -25- the value will be changed in steps of 10. Push, hold and turn
the X parameter knob -25- and the value will be changed in steps of 100.
Y parameter dry/wet value: 0 – 100%

> REVERB = reverb effect
Simulates reflecting sound waves in a naturally restricted area.

Time parameter value:

0 – 100%

Direct bar assignment:

0/20/40/60/80/100%

By turning the X parameter knob -25 the value will be changed in steps of 1. Push, hold and turn the
X parameter knob -25- and the value will change in steps of 10.
Y parameter dry/wet value: 0 – 100%

> TRANS = transformer effect
Creates the signal‘s chopping by fading in and out, similar to fast cutting with the crossfader.

Time parameter value:

25 – 65000 msec.

Direct bar assignment:

500/1000/2000/4000/8000/16000 msec.

By turning the X parameter knob -25- the value changes in steps of 1. Push, hold and turn the X pa-
rameter knob -25- and the value will change in steps of 100.
Y parameter dry/wet value: 0 - 100%

> Pitchshifter = pitchshifter effect
Raises or lowers the signal‘s tone pitch.

Time parameter value:

-100 – 100%

Direct bar assignment:

-100/-50/-33/0/50/100%

By turning the X parameter knob -25- the value changes in steps of 1. Push, hold and turn the X pa-
rameter knob -25- and the value will change in steps of 10.
Y parameter dry/wet value: 0 - 100%