Reloop RMP-2760 - Manual (Page 24)

14. Troubleshooting
If your Reloop RMP-2760 b is experiencing any difficulties please check the
following table for malfunction symptoms and take the corrective measures
proposed in the table.
TECHNICAL INFORMATION
The following specifications are not verified by Global Distribution GmbH in
terms of plausibility and accuracy:
Frequency response: 20 Hz - 20 kHz
Channel separation: 99 dB
S/N ratio: 120 dB
D/A converter: 8-fold/1 Bit
Dimensions of drive: 482 x 88.8 x 262.5 mm
Dimensions of control unit: 482 x 88.8 x 94 mm
Weight of drive: 5 kg
Weight of control unit: 1.6 kg
24
ENGLISH
Possible cause
Poor mains plug
connection.
The CD is upside in the
tray down or is soiled.
Output cable is wrong
or not correctly
connected, wrong
amplifier or mixing
console operation.
The CD player is
continuously exposed to
vibrations and shocks
for longer than 30
seconds.
Loose cable
connections.
Symptoms
No power when
activating the power
ON/OFF switch.
The CD replay does not
start.
No sound.
CD skips.
Humming sound.
Remedy
Check mains plug
connection
Place CD in tray with
label facing up; clean
CD.
Check connections of
output cables and
settings on amplifier or
mixing console.
Install the equipment at
another location.
Check sound plugs.
IM_RMP2760b 27.08.2007 13:26 Uhr Seite 24