Reloop RMP-2760 - Manual (Page 20)

H) Bar Diagram
A 10-digit bar diagram -H- indicates in addition to the time -N- the time
played as a graphic.
I) Loop
If the track playing is in Loop mode, the Loop display is indicated.
J) BPM
As soon as the TAP/BPM button -14- is activated, the display -M- reads the
current BPM and shows "BPM".
K) Reloop
If a starting point for a loop is selected while in Play mode, the display is
emptied. As soon as an end point has been selected and "Reloop" -K- is
indicated.
L) Pitch
The Pitch display goes on as soon as the Pitch mode has been activated.
M) BPM/Pitch
Indicates either the current BPM or Pitch rating. The standard display
indicates the Pitch rating of the respective player. When operating the
TAP/BPM button -14- the BPM value is indicated at this point for three
seconds. After three seconds, the display changes to the pitch rating again.
N) Time
Indicates the time played in M(inutes), S(econds) and F(rames).
O) ID3 Tag
Indicates the name of the artist, title and folder (for a MP3-CD).
P) Total Remain
The display indicates "Total Remain". The total remaining time of the entire
CD is displayed. The bar diagram decreases from left to right; when reaching
the final point the entire bar flashes until the CD ends.
Q) Remain
The display indicates "Remain". The remaining time of the current track is
displayed. The bar diagram decreases from left to right; when reaching the
last digit, the entire bar flashes until the track ends.
R) Elapsed
The display indicates "Elapsed". The time passed of the current track is
displayed. The bar diagram increases from left to right; if the bar is complete,
the entire bar flashes until the track ends.
S) Auto BPM
Is indicated when activating the Auto BPM Counter.
20
ENGLISH
IM_RMP2760b 27.08.2007 13:26 Uhr Seite 20