Reloop RMP-2 MK2 LTD. - Manual (Page 36)

TROUBLESHOOTING
If your Reloop RMP-2 MK2 s is experiencing any difficulties please check the
following table for malfunction symptoms and take the corrective measures
proposed in the table.
TECHNICAL INFORMATION
Global Distribution GmbH did not check the following manufacturer's data for
plausibility and accuracy:
Frequency response: 20 Hz - 20 kHz
Channel separation: 81 dB
S/N ratio: 90 dB
D/A converter: 8-fold/1 Bit
MP3 Formats: MPEG 1 Layer 3 standard
MPEG 2 Layer 3 standard
MPEG 2.5 Layer 3 standard
Maximum MP3 folders: 255
Maximum MP3 files: 999
Dimensions: 320 x 112.6 x 340 mm
Weight: 4.4 kg
36
ENGLISH
Possible cause
Poor mains plug
connection.
The CD is upside in the
tray down or is soiled.
Output cable is wrong
or not correctly
connected, wrong
amplifier or mixing
console operation.
The CD player is
continuously exposed to
vibrations and shocks
for longer than 30
seconds.
Loose cable
connections.
Symptoms
No power when
activating the power
ON/OFF switch.
The CD replay does not
start.
No sound.
CD skips.
Humming sound.
Remedy
Check mains plug
connection
Place CD in tray with
label facing up; clean
CD.
Check connections of
output cables and
settings on amplifier or
mixing console.
Install the equipment at
another location.
Check sound plugs.
IM_RMP2_MK2.qxp 14.01.2009 15:23 Uhr Seite 36