English – Reloop RMP-2 MK2 LTD. User Manual

Page 26

9. Bank Programme button

Use the Bank Programme function -9- to play a sequence of loops saved on
the banks. If loops have been saved on the sample banks, activate the Bank
Programme function with the Bank-P button -9-.

For details on how to save loops, go to the chapter entitled "Sampling".

The display indicates "Bank P01". By pressing the Cue/Sample buttons 1 to 4
-15- in any sequence, an individualised sequence of up to 12 samples can be
programmed.

NOTE:

There are two different play modes: An Endless mode and a One Shot mode.
The Endless mode is activated by pressing the Sampler button - 17 - once;
the sampler LED is continually illuminated. In Endless mode the
programmed sequence is played endlessly. The One Shot mode is activated
by pressing the Sampler button - 17 - again. The sampler LED flashes. In One
Shot mode the programmed sequence is played once only.

To play the above programmed sequence, press the Sampler button -17-
(once for Endless mode / twice for One Shot mode) and press the Bank P.
button -9- to start play. To stop play, press the Sampler button -17- once again
until the LED is off.

10. Reverse button

Activate the Reverse function -10- to play the track in reverse. The LED is on.
Press the button again to deactivate this effect. The LED goes off.

11. Display

The Display -11- indicates all important functions of the player:

ENGLISH

IM_RMP2_MK2.qxp 14.01.2009 15:23 Uhr Seite 26