Reloop SPIN! - Manual (Page 71)

45. Crossfader
The crossfader -45- is just intended for the PC control mode. When in regular
timecode mode (external mixer) you will not need the crossfader. Via the fader
you can crossfade from channel 1 to 2 and vice versa.
NOTE!
When in timecode mode the crossfader should be in the middle position.
46. Beat Match function
The beat match function is a handy helping tool in order to match the pitch of two
different tracks with the push of a button. You can either match the right player
with the left player or you can match the left player with the right player .
47. Cue points
It is possible to set up to 6 cue points per track. They will be permanentely saved
automatically until they are replaced by new ones.
•
In order to set a cue point via mouse push the right mouse button at the
desired time.
• In order to call up a cue point a click of the left mouse button suffices.
• If a cue point has been saved you will see a thick green mark on the
corresponding cue button.
• Set the cue point for player 1 via the numbers 1 – 5 (only 5 cue points per
player) and for player two via the numbers 6 – 0.
• If you push the according number again the cue point will be called up (hot
cue).
71
ENGLISH
Beat Match Shortcut
Player 1 Z
Player 2 X