Reloop TERMINAL MIX 4 SERATO DJ BUNDLE - Upgrade Manual For Serato DJ User Manual
Page 3

TM2/4 Upgrade Manual for Serato DJ | www.reloop.com | Page (3 of 7)
BacK:
n
By pressing the ‚BACK‘ button you can go from an active crate/folder back to the previous structure.
platter skip:
n
Press the ‚SHIFT‘ button and turn the ‚JOG WHEEL‘ to fast search within a track. Platter Skip works only with
tracks that dispose of a set beatgrid.
n
Make sure to pay attention to the track overview display.
sp-6 (sampler):
n
The SP-6 is a full-blown sampler. Its 24 slots are organized in 4 banks with 6 samples each.
n
Samples 1-3 can be triggered from decks 1 & 3, samples 4-6 can be triggered from decks 2 & 4 via the ‚SAMPLE
PLAY BUTTON‘. ‚SHIFT‘+‘SAMPLE PLAY BUTTON‘ stops the corresponding sample.
n
The banks can be selected via bank select switch forward (decks 1 & 3) or backward (decks 2&4).
n
If a sample has been loaded into a slot, the corresponding LED will be illuminated. If the sample is being played,
the corresponding LED will blink.
n
The SP-6 disposes of further extensive software features. View their operation in the complete Serato instruc-
tion manual
(http://serato.com/manuals).
faDer-start:
n
‚SHIFT‘+‘TRACK LOAD‘ activates fader-start for the respective deck.
n
The ‚TRACK LOAD‘ button blinks for as long as fader-start is activated.
n
When Fader-Start is activaded the track will start immediately after opening the fader.
When closing the Fader the Track jump back in CUE-Position.
+
+
sample 1-3
sample 4-6
Bank zurück
aBcD
Bank vor
aBcD