RCBS Tube Pistol Bullet Feeder User Manual
Page 2

LIFETIME LIMITED WARRANTY
Your RCBS Tube Pistol Bullet Feeder is warranted to
be free from defects in material or workmanship for
as long as the original owner owns it. This warranty
is extended only to the original consumer purchaser.
This warranty excludes any electrical components
or products. All RCBS products are intended for
non-commercial use by hobbyists. Any other use
of these products will void the warranty. Should
you believe that your Tube Pistol Bullet Feeder is
defective in material or workmanship, you must return
it to Ammunition Accessories Inc. through its Oroville
operation (hereinafter “Oroville Operations”) postage
paid for evaluation. If defective, the product will be
repaired or replaced at Oroville Operations’ option,
at no charge.
Send a dated proof of purchase to Oroville Operations
for return shipping and handling, along with the Tube
Pistol Bullet Feeder to:
Ammunition Accessories Inc.,
Oroville Operations
605 Oro Dam Blvd East
Oroville, California 95965
Warranty services cannot be provided without
meeting the above requirements.
THIS LIMITED LIFETIME WARRANTY DOES NOT
COVER DEFECTS OR DAMAGE RESULTING FROM:
CARELESSNESS, MISUSE, COMMERCIAL USE,
ABUSE, IMPROPER INSTALLATION, MODIFICATION,
OR NORMAL WEAR AND TEAR. THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE LIMITED TO
THE DURATION OF THIS TWO YEAR LIMITED
WARRANTY. OROVILLE OPERATIONS IS NOT
LIABLE FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT AND
UNDER NO CIRCUMSTANCES SHALL OROVILLE
OPERATIONS BE LIABLE FOR CONSEQUENTIAL
OR INCIDENTAL DAMAGES. HOWEVER, SOME
STATES DO NOT ALLOW LIMITATIONS ON
INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION OR EXCLUSION MAY
NOT APPLY TO YOU.
The above warranty provides the sole and exclusive
warranty available to the customer in the event of a
defect in material or workmanship in the Tube Pistol
Bullet Feeder. This warranty gives you specific legal
rights, and you may also have other rights which vary
from State to State.
SAFETY
Reloading is an enjoyable and rewarding hobby
that can be conducted safely. But, as with any
hobby, carelessness or negligence can make
reloading hazardous. This product has been designed
from the beginning with the user’s safety in mind.
When reloading, safety rules must be followed. By
observing these rules, the chance of a hazardous
occurrence causing personal injury or property
damage is minimized.
GENERAL
• Use all equipment as the manufacturer
recommends. Study the instructions carefully and
become thoroughly familiar with the operation of
the product. If you do not have written instructions,
request a copy from the equipment manufacturer.
• Do not take short cuts. Attempting to bypass
established procedures is an invitation to
an accident.
• Observe “good housekeeping” in the reloading
area. Keep tools and components neat, clean and
orderly. Promptly and completely clean up primer
and powder spills.
• Reload only when you can give your undivided
attention. Do not reload when fatigued or ill, or
under the influence of medications or alcohol.
• Develop a reloading routine to avoid mistakes
which may prove hazardous. Do not rush - load
at a leisurely pace.
• Always wear adequate eye protection to protect
your eyes from flying particles. You assume
unnecessary risk when reloading without wearing
safety glasses.
WARNING!
Before using the RCBS
®
Tube Pistol Bullet Feeder, read these instructions carefully to fully learn how to safely
operate the related reloading equipment. Failure to properly operate the related reloading equipment can result
in severe personal injury and/or equipment damage.
If you have any questions while assembling or operating this tool,
Call us at 1-800-533-5000 or 1-530-533-5191
Monday – Thursday 6:30 am – 4:00 pm Pacific Time
(hours may vary)
Or email us at
This instruction manual contains specific safety and operating information. It should be considered a
permanent part of your reloading equipment and remain with the equipment at all times for easy reference.
2