RCBS Gold Medal Dies - Manual (Page 4)

INTRODUCTION
RCBS Gold Medal dies are manufactured for the most
demanding competitive marksmen, precision shooters,
varmint and big game hunters. They offer features not
available on standard RCBS reloading dies. First, the
Sizer Die uses changeable neck bushings, available in
.001" increments, to allow you to control the precise
amount of neck tension desired. The Seater Die features
a micrometer bullet seating head that lets you dial the
seating depth you want. Each graduation moves the seat-
ing depth 1/1000 of an inch. The handy bullet "window"
lets you insert bullets through the side of the die instead
of the bottom, while a special bullet/cartridge case seating
sleeve retains the bullet to be loaded and assures correct
bullet to case alignment before and after seating.
All RCBS Dies feature a steel lock ring with a "hex"
design that allows even tighter control over precise align-
ments. A solid brass setscrew locks the ring securely, yet
will not damage the die threads. Once the large lock ring
on the die is set, it can be locked in the desired position
by lightly tightening the setscrew. The die will then hold
the proper setting and may be reused in the same press
without readjustment.
PACKAGING
All RCBS Dies are packaged in convenient plastic storage
boxes specially designed by RCBS to protect your dies in
shipment and during storage. A unique cradle holds the
dies firmly in place to prevent damage and rolling around.
Each box contains a label for recording your favorite loads
and can be mounted on the inside lid for quick reference.
A label on the outside of the box lists the die caliber for
easy identification.
CUSTOMER SERVICE
All RCBS Dies are carefully checked and thoroughly
inspected before shipping. Each die will reload fired cases
from any standard chamber of the caliber stamped on the