Photogenic Professional Lighting PhotoMaster II - Manual (Page 18)

18
Limited PhotoMaster Warranty
Photogenic warranties the “standard line” products are free from defects in
material and workmanship of the PhotoMaster PM400, PM400R, PM800,
PM800R and PA8 units for a period of three years, from date of
manufacture. At our choice, we will repair or replace any of the above that
is deemed to be defective. This warranty does not cover damages caused by
shipping, product abuse or use other than the intended photographic
applications.
Any product modifications will render this warranty void. Use of other
manufacture’s accessories (including flash tubes and modeling lamps),
which restrict normal or intended operation (especially venting airflow on
the PA8), may cause damage and will void this warranty.
SERVICE
The photographer should not attempt to make internal repairs.
Consult a dealer for an authorized Photogenic Professional Lighting
service agent. This will provide you safety, insure proper
operational functions and provide continuation of your warranty.
The technicians find in helpful to have the complete unit to better
troubleshoot and evaluate any problems. This includes the light unit,
the power cord, light heads, head cables, flash tubes and all modeling
lamps.
For replacing the flashtube or modeling lamp, follow the directions
and specifications given earlier in this manual in the setup section.
Before removing the old tubes or installing new tubes, always
unplug your PhotoMaster to discharge the stored energy. Wait
approximately 30 seconds for the main capacitors to deplete any
residual stored wattage. Never place your fingers or any metal
objects into the flash or modeling sockets. Contact with high voltage
may result.