Photogenic Professional Lighting PhotoMaster II - Manual (Page 14)

14
SPECIFICATIONS
Voltage Smart PhotoMaster PM800, PM800R
General:
Flash Power….........................................……….. 25 to 800 watt-seconds.
Maximum (6 f-stops)
Flash Duration….........................................…….. 1/962 second at Full
1/431 second at 1/32
Reciprocity………………………………………. Excellent, no filters required
Recycling time…..........................................……. 0.8 to 3 seconds @ full
Power Control…............................................…… Full to 1/32 range.
(6 f-stops)
0.1 f-stop resolution.
Modeling Light Power ................................…… . 100 Watt Quartz, ESR
Modeling Light Control ...............................…… Full to 1/32 range.
0.1 f-stop resolution.
Line voltage regulated.
Triggering ....................................................……. Built in Photo slave.
Push to Test button.
Synchronization Jack.
12 volt isolated.
Main Supply …………..……………………….. 90-250 VAC, 50/60 Hz, 3.5 A.
Consumption …………........................................ 0.2 amps idling,
5.5 amps charging.
Voltage Stabilization …....................................... Plus or minus 0.05 f-stop.
Packaging PM800, PM800R................................ Tough, Kydex plastic case.
Packaging PA8…….............................................. Extruded Aluminum case.
Weight PM800, PM800R…................................ 6.2
pounds.
Weight PA8…..................................................... 3.5 pounds, (w flash tube).
Dimensions PM400, PM400R……..................... 9”H x 9.5”W x 6”D
PA8 (housing only)……….…………4.5”H x 4.5”W x 6”D
Flashtubes and Modeling Lamps:
Flashtube ..................................................……… Plug-in style, use
Photogenic’s C4-19, C4-19C, C4-19D, C4-19F, L4-19 or L4-19C.
Modeling Lamp (each PA8)......................……. 100-Watt Quartz Halogen, ESR.
Overload Protection PM400, PM400R.......…... Circuit Breaker, 12 Amp.
Overload Protection Fuse PA8..................5 mm X 20 mm, 3 Amp, fast blow.