Nipros FS-40X - Manual (Page 5)

05
4 ch Field Mixer FS-40X Parts Names and Funcctions
Input panel （Left side）
METER OUT Connector (6-pin)
Used for connection to the 4 ch external audio meter MB-40X(optional).
ON ： The LED of the MASTE L/R volume controls and the light of the VU/PEAK meters
are turn on.
OFF： They are turn off. Other LED turns on depending on each function.
LIGHT Switch
MS IN 3/4 Connector (XLR 5-pin)
Used for the stereo signals input. The signals are input to the channel 3 and 4.
(NOTE : Do not connect to the MS connector and to the CH 3,4 connectors at the same time.
When using the MS microphone, set the CH select swithes of the CH 3 and 4 on the main panel
to the MS position.
pinassign
1PIN：GND
3PIN：IN 1 4PIN：IN 2
6PIN：IN 4
1 6
2 5
3 4
2PIN：+12V 5PIN：IN 3
1PIN：GND
3PIN：COLD
4PIN：HOT
2PIN：HOT
5PIN：COLD
ch3
ch4
1 2
3
4
5
pinassign