Nipros HDS-300 User Manual

Page 2

■Installation

1.Mount a camera to the HDS-300 with the supplied 1/4 or 3/8 inch camera screw.

For a handy camera ; AG-HPX250,AG-160/A, etc.

1.1. Attach a camera to HDS-300
directly.

1.2. Using a Tripod Base

For a Shoulder type camera;

( )

1. Attach a camera to HDS-300
and secure it with the supplied
screw.

2. Adjusting the height of the head
plate of HDS-300 : Loosen the
head height positioning screw and
adjust the height of the head. And
secure it with the supplied screw.

3. Mount the camera to HDS-300.

Tripod Base

Tripod Adaptor Plate

Head height positioning screw

1. Attach a Tripod Base to the

HDS-300 and secure it with

the supplied screw.

2. Attach a Tripod Adaptor Plate

(ST-1, optional) to the camera

and secure it with the supplied

screw.

1. Attach a Tripod Base to HDS-300

and secure it with the supplied

screw.

1.3. Using a Tripod Base

3. Mount the camera to HDS-300.

Tripod Base

HDS-300
Bottom Plate

Bottom
(lower)
surface

or Camera

1. Attach the Tripod Base or Camera on the HDS-300

2. Attach the Tripod Adaptor Plate ST-2 or
Tripod Plate on the bottom surface of the
HDS-300 with the supplied screws.

Tripod Adaptor Plate ST-2
with the supplied screws.

Select the appropriate holes from among the twelve
long holes considering the balance of the weight of
the camera and others.

Tripod Base

HDS-300 (Bottom Plate)

Tripod Adaptor Plate ST-2

How to attach the Tripod Base and Tripod Adaptor Plate ST-2

Camera

Dent for

screw head

Dent for

screw head

Tripod Base
Tripod