Nipros HDP-2000 - Manual (Page 7)

07
PB IN Connector (8ピン）
POWER Switch
Turns the power on or off.
DC IN Connector (XLR 4-pin）
Used for connection to the AC adaptor(DC power supply) to supply power to the
teleprompter.
Right side panel
When using the prompter connecting with the PC, used to connect with the PB
Remote Controller PB-RM1A or PB-RM1B.
Pressing the button of the PB Remote Controller changes the input signal from
the PC IN signal to the HD-SDI IN signal.
VBS IN Connector (BNC)
Used to input the composite video signal to the prompter with the BNC cable.
PC IN Connector (HD D-sub 15-pin）
Used to input the PC signal to the prompter with the HD D-sub 15-pin cable.