Adjustments and settings, Cable select switch setting, Intercom / headset volume adjustment – Nipros ES-600P User Manual
Page 27: Adjustments and settings for es-600p

Adjustments and Settings
27
1
CABLE select switch setting
ケーブル切替スイッチの設定
HEADSET
25
50
75
100
EXT LINE (4W I/O)
INTERCOM
HEADSET
ES-600
SIDE TONE MIC H.P
Set the CABLE select switch to the appropriate position according to the length of the 26-pin
multi-cable connected to the CABLE connector.
1
2
INTERCOM / HEADSET volume adjustment
インターカムヘッドセットの調整
2
CABLE切替スイッチを CABLEコネクタに接続された26ピンケーブルの長さに合わせて切り替えます。
CABLE
OUT
IN
SIDE TONE
ES-600P 調整と設定
Adjustments and settings for ES-600P
自分の声が適当に聞こえるようにSIDE TONEで調整します。
Adjust the SIDE TONE volume to hear your own voice properly.
Put on the headset DL-400
ヘッドセットDL-400を装着します。
H.P.を徐々に上げていきます。自分自身、他のオペレーター(カメラマン)のお互いの声がよく聞こえるようにヘッドセット
のH.P(ヘッドホン), および MIC(マイク)のボリュームを調整します。
While listening to your own voice and the other operators voice(cameraman s), turn up the H.P
and MIC volumes gradually so that both the voices can be heard clearly.
ES-600P 調整・設定
Multi-core Studio System ES-600P/ES-500P
CABLE select switch
NOTICE : ES-600P and ES-500P do not convert the media or format of the input signals to annother.
注意 : ES-600P および ES-500Pは、入力信号のメディア,フォーマットの変換はしません。