BenQ PE7700 - Manual (Page 18)

18 Connecting various equipment
Eng
lish
Connecting S-video or video devices
Connecting a computer
Connect the projector to a computer with a VGA-BNC cable.
If the selected video image is not displayed after the projector is turned on and the correct video source
has been selected, please check that the video source is turned on and operating correctly. Also check
that the signal cables have been connected correctly.
Many laptops do not turn on their external video ports when connected to a projector. Usually a key combo
like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/LCD or a
function key with a monitor symbol on the laptop. Press FN and the labeled function key simultaneously.
Refer to your laptop’s documentation to learn your laptop’s key combination.
From audio output
terminals To audio input
terminals
S-Video cable
Video cable
VGA-BNC cable
From audio output
terminals To audio input
terminals
Laptop or desktop computer
PE7700-e.book Page 18 Monday, January 10, 2005 11:20 AM