BenQ PE7700 - Manual (Page 17)

17 Connecting various equipment
Eng
lish Connecting various equipment
You can connect the projector to any type of video equipment, such as a VCR, DVD player, digital tuner, cable
or satellite box, video game console or digital camera. You can also connect it to a desktop or laptop PC or
Apple Macintosh system.
The projector can connect multiple video equipment at the same time by using different cables. Make sure you
select right signal input to display.
When connecting any signal source to the projector, be sure to:
1. Turn off all equipment before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
4. Connect all audio signals to external speakers. This projector is not equipped with speakers.
In the connections shown below, only certain cables are included with the projector (see page 10 ). Other
cables are commercially available from electronics stores.
Connecting video inputs
Connecting HDMI devices
You are required to use a HDMI cable when making connection between the projector and HDMI devices.
HDMI (High-Definition Multimedia Interface) supports uncompressed video data transmission between
compatible devices like DTV tuners, DVD players and displays over a single cable. It provides pure digital
viewing and listening experience.
Connecting component-video devices
Be sure to match the corresponding colors between the cables and the terminals.
HDMI cable
From audio output
terminals To audio input
terminals
HDMI device: DVD player, digital tuner, etc.
AV equipment: DVD player, digital tuner, etc.
From audio output
terminals To audio input
terminals
Component cable
PE7700-e.book Page 17 Monday, January 10, 2005 11:20 AM