Krell S-300i - Manual (Page 28)

ON
The S-300i turns on automatically, remaining in stand-by mode only for
a brief warm-up period, when ac power is applied.
Input Name
This function enables you to select a device name for each input.
The input name options are listed in the left margin, on this page.
Enter the menu, then:
1.
Use the level control knob on the preamplifier front panel or up
and down keys (14) on the remote control to select: INPUT
NAME.
2. Press the level control knob on the preamplifier front panel or
the enter key (8) on the remote control. The front panel display
(9) shows the default mode: S-1.
3. Use the level control knob or the up and down keys to select
the desired input: S-1, S-2, S-3 or B-1.
4. Press the enter button or key. The front panel display shows no
characters.
5. Use the level control knob or the up and down keys to select
the desired input name, from the input name options listed at
left.
6. Press the enter button or key to confirm the selection and return
to the input list, in Step 3. The front panel display shows the
input name.
To select input names for other inputs, repeat Steps 3 and 4.
Info
This function enables you to access information about the pream-
plifier software.
Enter the menu, then:
1. Use the level control knob on the preamplifier front panel or vol
ume up and down keys (7) on the remote control to select:
INFO.
2. Press the level control knob on the preamplifier front panel or
the enter key (8) on the remote control. The front panel display
(9) shows the software version number.
2 4 Krell S-300i
Optional Configurations, c o n t i n u e d