Krell S-300i - Manual (Page 25)

7 . Press the level control knob or key. The front panel display shows
the default mode: HIGH.
8 . Use the level control knob or the volume up and down keys to
select the desired brightness: LOW, MED, or HIGH.
9 . Press the level control knob or key to confirm the selection. The
front panel display reads: BRIGHTNESS.
O N
The front panel display is always on.
T I M E D
The front panel display turns off after 30 seconds.
B R I G H T N E S S
Controls the brightness of the display. When the mode setting is OFF, the
display is at the brightness selected when in menu mode, and turns com-
pletely off when you leave the menu mode.
Mute
This function enables you to control the mute mode. Options are:
FULL, -20 dB.
Enter the menu, then:
1.
Use the level control knob, or the volume up and down keys (7)
to select: MUTE.
2. Press the level control knob on the preamplifier front panel or
the enter key (8) on the remote control. The front panel display
(9) shows the default mode: FULL.
3. Use the level control knob, or the up and down volume keys to
select the desired option: FULL or -20 dB.
4. Press the level control knob or key to confirm the selection. The
front panel display reads: MUTE.
FULL
The speaker and preamp outputs are completely silenced.
-20dB
The speaker and preamp outputs are reduced by 20 dB and may still be
audible.
Input Trigger
This function enables you to configure the input trigger. The
options are: Off, Normal, Theater.
Krell S-300i 2 1
Optional Configurations, c o n t i n u e d