Kino Flo Foto-Flo 400 - Manual (Page 4)

4
The Foto-Flo 400 fixture is comprised of a removable Louver,
Reflector, and Lamp Harness. The Louver and Reflector are
held in place with Velcro fasteners. The Lamp Harness is
secured by means of a ¼ turn fastener and two clips.
To Release the Lamp Harness
Remove the harness from 2 clips located under the reflector.
Rotate the ¼ turn fastener clockwise to release harness.
The lamps can operate independent
of the fixture allowing them to be
built into sets or custom soft boxes
or hand held as a single tube for an
eye-light
.
WARNING:
Always use safety coated
lamps to avoid injury if lamp breaks.