Kino Flo 12V Single Kit - Manual (Page 4)

4
Most applications for the Fixture are in tight locations, where a strip of
double sided Velcro or gaffer tape can hold the Fixture in place.
For stand mounting, the Fixture is designed to accept a single
mount plate, MTP-K1 (sold separately).
Stand Mounting
• Pull back the two push pins on the single mount.
• Insert the mount plate into the receptacle holes on the
fixture mating plate.
• Push down on the two push-pins to lock the plate in place.
• Reverse the process to release the plate.
• The knurled 3/8” pin can be clamped onto a grip head.
Warning! To Ensure Proper Operation
ALWAYS TURN OFF THE BALLAST BEFORE connecting or
disconnecting lamps, harnesses or Head Extension Cables.
Maximum distance, 50ft (2 x 25ft cables)
Ballast Operation
The 12V Single Ballast (BAL-140X) operates remote from the fixture.
Connect the 15” single lamp harness to the extension cable or
the Ballast. After the lamp is properly installed, the Ballast can be
turned on. Avoid operating in temperatures above 125
°F (51°C) or
below 32
°F (0°C).