Kino Flo ParaBeam 400/200 DMX - Manual (Page 8)

8
ParaBeam Pole-Op
ParaBeam Yoke Mount
The yoke has a ½” hole to accept industry standard mounting hardware.
The ParaBeam 410 Yoke Mount can hang from a grid by a junior pipe hanger using a
Junior Pin Assembly for Yoke (MTP-I80), sold separately.
The ParaBeam 210 Yoke Mount can also hang from a grid by a junior pipe hanger using
a Junior Pin Assembly for Yoke (MTP-I80) or a baby pipe hanger using a Baby Receiver
Assembly for Yoke (MTP-I40), also sold separately.
The ParaBeam 410 and 210 Pole-Op fixtures include a yoke with
an attached junior pin. They can be hung from a grid with a Junior
pipe hanger.
Junior pin attached to Pole-Op Yoke
Note: Because of weight capacity,
the MTP-I40 can only be used on the
ParaBeam 210 Yoke Fixture.
Warning: Use only M5 X 10mm screws (supplied) to assemble yoke. Note that threads on
the fixture are self-locking and may seem tight. Replacement screw: Part No. 2020127
Recommended torque setting:
USA: 18 lb-in
Metric: 2 Nm
MTP-I80 MTP-I40