Kino Flo Image 87/47 DMX Series - Manual (Page 13)

13
HO/Std Control:
Image 87: Assign a second dimmer channel to the 9th address.
Image 47: Assign a second dimmer channel to the 5th address.
Dimmer level from 0%~50% operates all the lamps at HO mode. Dimmer level from
50%~100% operates the lamps in the Std mode and the overall light output of the fixture
drops by ½ f-stop.
Dimmer level – Lamp sequence
Sliding the fader on the dimmer board from 0% ~100% controls the number of lamps
that are on within a fixture. Note: The lamps may respond ± 4 slider channel levels,
depending on the dimmer board.
Image 87 Lamp Sequence
(DMX Channel 1)
(DMX Channel 1)
Image 47 Lamp Sequence
Image 87 DMX
Lamp Sequence
DMX Channel 1
Lamp # Dimmer Level
Lamp 1 6
Lamp 1~2 19
Lamp 1~3 32
Lamp 1~4 45
Lamp 1~5 57
Lamp 1~6 69
Lamp 1~7 82
Lamp 1~8 95
Image 47 DMX
Lamp Sequence
DMX Channel 1
Lamp # Dimmer Level
Lamp 1 12
Lamp 1~2 37
Lamp 1~3 64
Lamp 1~4 83