Kino Flo Celeb 200 DMX LED - Manual (Page 15)

15
Applying Gel to Frame
Inserting Gel Frame and Louver
Option 1 - The Gel Frame comes with gel clips. Cut the gel to size and use the clips to
fasten the gel to the frame.
Option 2 – Apply transfer tape directly to the Gel Frame. The clips are not necessary
when taping the gel.
The Celeb includes spring loaded accessory holders and two channels to hold the
Gel Frame and Honeycomb Louver.
Place the long edge of the Gel Frame or Honeycomb Louver into the lower channel.
Press down on the left and right corners of the Gel Frame or Louver and slip the upper
edge into the upper channel of the fixture. To remove, reverse the procedure.
Note: Do not press down along the top center portion of the Gel Frame or Louver.
Doing so may deform the Gel Frame or Louver over repeated usage.