JK Audio RemoteAmp Three - Manual (Page 2)

2
JK Audio combines professional audio electronics in
a rugged new belt pack design. RemoteAmp Three
provides a listen only connection for IFB or full
bandwidth audio monitoring. The XLR line level in-
put accepts either a balanced mono signal or a one
or two channel party line intercom feed (listen-only).
The XLR source switch selects between balanced
input and intercom monitoring.
An integrated speaker is disabled when headphones
or earphones are connected. There are separate
volume controls for 2 channel party line monitoring.
The high output 1/4” headphone jack will cut through
any crowd noise. Connect a mono IFB earpiece or
stereo headphones to the 3.5 mm earpiece jack.
Introduction
RemoteAmp Three contains a headphone
amplifier that is more powerful than a
consumer product. JK Audio products are
designed for the broadcast industry.
The broadcast professional must be able to hear
headphone signals over the ambient noise level.
From the cheering crowd at a football game to track-
side at a car race, the program material or cues
must be heard at high volumes without distortion.
15
Notes