Features—front view – JK Audio innkeeper LTD User Manual
Page 5
5
Features—Front View
1.
Call Button - Takes the phone line off hook - press this button
to answer a call or to direct a call from your phone through the
hybrid.
2.
OH LED - Lit when you are on line with a call (off-hook). LED
will flicker when you have an incoming call.
3.
Drop Button - Press this button to drop (hang up) a call.
4.
Send LEDs - Indicate the signal level going out to the phone
line.
5.
Power LED - Indicates that the unit is receiving power.
6.
Caller LEDs - Indicate the signal level coming in from the
phone line, after the DSP.
7.
Send Level - Recessed volume control adjusts the signal that
you are sending down the telephone line.
8.
Caller Level - Recessed volume control adjusts the level of the
signal coming in from the telephone line, going out the “Caller”
XLR jack.
Figure 1: Front View
1 2 3
4
5 6
7
8
- AutoHybrid - Telephone Audio Interface (16 pages)
- BlueDriver-F3 (24 pages)
- BlueDriver-M3 (24 pages)
- BlueKeeper (12 pages)
- BlueKeeper (24 pages)
- BluePack (24 pages)
- BlueSet (20 pages)
- Broadcast Host (20 pages)
- BSET-HS1 (11 pages)
- CellTap (8 pages)
- CellTap (4 pages)
- ComPack (8 pages)
- ComPack (16 pages)
- Concierge 2x6 (11 pages)
- Concierge 2x6 (10 pages)
- Daptor One (8 pages)
- Daptor One (4 pages)
- Daptor Two (4 pages)
- Daptor Two (8 pages)
- Daptor Three (6 pages)
- Daptor Three (12 pages)
- Four IFB (10 pages)
- Four IFB (20 pages)
- Guest Module 1 (5 pages)
- Inline Patch (6 pages)
- innkeeper 1x/rx (8 pages)
- innkeeper 1x/rx (16 pages)
- innkeeper 2 (20 pages)
- innkeeper 2 (10 pages)
- innkeeper LTD (10 pages)
- innkeeper PBX (20 pages)
- Interchange (16 pages)
- Interloop (24 pages)
- Outerloop (24 pages)
- PBXport (8 pages)
- PBXport (16 pages)
- Pureformer (2 pages)
- Pureformer (4 pages)
- QuickTap (4 pages)
- QuickTap (8 pages)
- QuickTap IFB (4 pages)
- QuickTap IFB (8 pages)
- RemoteAmp (2 pages)
- RemoteAmp (4 pages)