IDX CW-5HD User Manual
Page 8

- 8 -
7. SDI IN
Connects to the video source’s SDI output connector.
8. SDI OUT
Loop-outputs the input SDI signal.
Used to allow for video monitoring on transmit side.
9. UNI/MULTI SW
Selects the link mode.
UNI :Unicast mode
MULTI :Multicast mode
10. DC-IN Connects
when
external power supply is used.
Connector XLR-4P male connector
Input range DC 11~17V
Pin assign No.1:negative(-) No.4:positive(+)
11. V-Plate
Mounts CW-5HD TX to the V-Mount of selected source.
⑧
⑨
⑩
⑦
⑪