HCO SR1-WCDi User Manual
Page 8

7
Time Lapse
The camera can be triggered by timer at a
preset time interval. Please note that even
in Time Lapse mode, the camera still can
be triggered unless the Sensitivity is set to
OFF.
Start-Stop
1/2
The camera can be set to operate only at
specific time period. To enable this function
select ON and press ok. The start-stop
menu will then appear. This menu contains
the settings for times to start and stop as
well as the trigger interval and time lapse
interval. The start-stop setting will override
all other general camera settings. Since
there are 2 periods available, make sure to
not program times that overlap.
SYS
Set Clock
Enter to set the Date and Time.
Time Stamp
ON /Off. Choose if the image stamp is to be
shown or not.
Flash Power
High / Low. Infrared Flash Power:
Format
Format the SD card. This will erase all data
on the SD card. This cannot be undone.
Overwrite
ON/OFF. If ON, once the SD card is full, the
camera will delete the oldest images / video
and keep recording the new images /
videos.