HCO SR1-WCDi - Manual (Page 7)

6
Please note that even in the OFF mode, the camera still consumes a
small amount of battery power. Therefore, please remove the batteries
if the camera is not in use for an extended time.
Menu Settings
Switch the camera to SETUP mode & press MENU. Press ▲▼
◄► to
select the desired value, And then press OK to save.
Setting Items Description
CAM
Mode Choose to take Photo / Video.
Photo Size
Choose the image size, e.g. 5MP, 8MP or
3MP.
Photo Burst
Choose the number of images taken after
each trigger (1-5).
Burst
Interval
Choose the interval time length between the
images taken in burst mode (Long / Short).
Video Size Choose the video resolution.
Video
Length
Set the video length to the desired duration.
PIR
Sensitivity
Select between High, Low, Normal and
OFF.
Trigger
Interval
The sleeping time after each trigger.