HCO SR1-IR - Manual (Page 7)

6
Time Lapse
The camera can be triggered by timer at a
preset time interval. Please note that even in
Time Lapse mode, the camera still can be
triggered unless the Sensitivity is set to OFF.
Start-Stop
1/2
The camera can be set to operate only at
specific time period. To enable this function
select ON and press ok. The start-stop menu
will then appear. This menu contains the
settings for times to start and stop as well as the
trigger interval and time lapse interval. The
start-stop setting will override all other general
camera settings. Since there are 2 periods
available, make sure to not program times that
overlap.
SYS
Set Clock Enter to set the Date and Time.
Time
Stamp
ON /Off. Choose if the image stamp is to be
shown or not.
Flash Power High / Low. Infrared Flash Power:
Format
Format the SD card. This will erase all data on
the SD card. This cannot be undone.
Overwrite
ON/OFF. If ON, once the SD card is full, the
camera will delete the oldest images / video and
keep recording the new images / videos.
Default Restore all settings to factory default values.
Information Show version of firmware on the camera.
Password This option allows a 6 digits password to be set.