Bogen CAM8PRO - Manual (Page 9)

Helpful Hints
Electrical equipment operates best in a clean, dry, well-ventilated environment free of
vibration and electromagnetic fields. The following are some guidelines to achieve
optimal performance.
Avoid placing the mixer and cables near heat sources. Be particularly aware of other
audio equipment, such as amplifiers, which can produce a great deal of heat when
operating.
To minimize hum in the system, avoid placing the mixer and cables near radio fre-
quency devices and other electromagnetic field sources such as:
• Fluorescent lights
• Electrical motors
• SCR dimmers
• AC power lines, etc.
Note: Always use 2-conductor shielded cable to reduce EMI or RF interference to the
Line/MIC inputs.
Keep the mixer and other equipment clean and free of dust by wiping occasionally
with a soft, damp cloth.
Protect the mixer from electrical damage by disconnecting it from the power source
whenever it will be unused for a week or longer.
The Bogen mixer is easy to install and adjust. The only tools needed are:
1. Slotted screwdriver
2. Phillips-head screwdriver
Page 9