Rear panel descriptions, Cam8pro rear panel, Page 8 – Bogen CAM8PRO User Manual
Page 8
CAM8PRO Rear Panel
1. Ground Connection on Rear Panel
Access to ground.
2. AC Power Jack
Mixer power supply input.
Accepts a 4-pin DIN connection from
a 17V CT 1.5 Amp transformer.
3. Phantom Power Switch
When activated, supplies 30V DC power to all inputs set to MIC level.
4. Auxiliary Bus Output
Balanced, line-level, connection to auxiliary output bus.
5. Main Output Microphone/Line Switch
Selects main output to be either MIC (-50 dBμ) or line (0 dBμ) level.
6. Main Bus Output
Balanced connection to main output bus.
7. Auxiliary Input
Balanced, buffered, uncontrolled, line-level terminals for additional (ninth) input connection
directly to the summing buses selected by internal jumpers. The factory default is both
jumpers installed. (See page 18 for details.)
8. Input Gain/Trim Control Screw
Adjusts gain of input stage, over a range of 40 dB.
9. Input Pad Microphone/Line Switch
Selects either MIC (-50 dBμ) or line (0 dBμ) level for corresponding input connection.
10. Input
Balanced input connection (pluggable terminal strip).
+
+
+
+
----
G
+
+
+
+
G
----
+
+
+
+
----
G
+
+
+
+
----
G
+
+
+
+
----
G
+
+
+
+
----
G
+
+
+
+
----
G
+
+
+
+
----
G
--
G
--
+
+
+
+
+
+
+
+
----
G
+
-
+
-
+
-
+
-
G
1
2
Trim
Mic
Line
3
4
Mic
Line
Trim
Trim
Mic
Line
5
Trim
Mic
Line
6
Mic
Line
Trim
7
Trim
Mic
Line
8
Trim
Mic
Line
MAIN
0dB
-50dB
Off
On
AUX OUT
AUX IN
AC
Power
Ground
Phantom
17VCT
Mic
Line
Trim
2
1
3
5
9
10
4
6
7
8
Page 8
Rear Panel Descriptions
No connect
Center
AC
AC