Fine tuning, Page 15 – Bogen CAM8PRO User Manual
Page 15
Fine Tuning
Low Cut Switch
To remove excessive bass from an individual channel, press the Low Cut Switch (1) for
that channel.
This feature helps eliminate low frequency noise (signals of 100 Hz and below, such as
background rumble from ventilation systems, etc.) and is used primarily with mic-level
input. It is particularly effective when handheld mics are used.
Phantom Power
If a condenser microphone(s) is not independently powered, press Phantom Power
Switch (2) to the “on” position.
The phantom power switch will power condenser (capacitor) mics through the mic cable.
Depressing the button simultaneously applies phantom power to all channels set to
mic-level.
-
+
-
+
Cut
Low
1
M.A
BUS
BUS
M.A
1
Page 15