Gossen MAVOSPEC - Manual (Page 7)

GOSSEN Foto- und Lichtmesstechnik GmbH 7
1 Preparation
1.1
Overview
1.2 Charging Instructions and Battery Care
To fully enjoy the enhanced hi-power capabilities, a device should be charged
for about 2 hours by connecting the USB cable to the mini USB port of the device and
the mini USB power supply attached to device on the other side and connected to the
mains. A device should be turned off. When a device is turned on, the charging process
takes much more time.
Power supply specification: Input AC 100-240V 50/60Hz 0.15A
Output 5V-1A
Power / Measure / Back
button
Press 1s to turn device on
Press 8s to turn device off
in emergency situations -
hard power off
During operation button
has back or measurement
functionality, depending
on the selected menu.
Menu key
M(easurement)-key
Micro SD card slot
Micro SD card can be
used to store measure-
ment data or to update
software.
Menu key
M(easurement)-key
Changeable measuring
head
Turn to the left to remove
the measuring head or to
the right to attache one.
Menu key
M(easurement)-key
Touch screen display
Displays the measurement
results and allows the
control of the device.
Menu key
M(easurement)-key
Mini USB port
for connecting device to
PC and share measurement
data or interact with the
software GL SpectroSoft.
Menu key
M(easurement)-key
i
When MAVOSPEC operates, it discharges battery even if it is connected to your PC with
USB cable. Please charge your MAVOSPEC with supplied charger. It could take few
hours to fully charge the device.