Gossen MAVOSPEC - Manual (Page 22)

GOSSEN Foto- und Lichtmesstechnik GmbH 22
4.2 Display Sensor
– MAVOPROBE 1.0 (M602A)
MAVOPROBE 1.0 is an MAVOSPEC accessory luminance measurement of flat LCD,
OLED panels and plasma FPDs. It is also a perfect solution for testing projection
displays as well as for OLED light source measurement.
The set includes an optical measuring probe, fiber optics and adaptor for the mini
–
spectrometer with a coder for automatic detection of accessory calibration file. The
measuring probe can be installed on a tripod for distance measurements. Alternatively,
it can be hanged directly on a screen with the use of a special stripe for contact
measurements.
Installation and startup
1. Remove the standard measuring head delivered with your mini-spectrometer.
2. Put on the adapter and then attach the sensor with a fiber optics.
3. We recommend using the display sensor always in an up-right position in order to
minimize the influence of polarization on your measurements.
4. At the side of the sensor you will find the standard photo thread which can be used
for installation on tripod.
5. Additional stripe with counterweight can be attached by putting the plastic clip into the
slot.
3. When connected to the computer the system will recognize the unit and download the
proper calibration file.