Glyph GT 205 - Manual (Page 12)

GT 205
About the GT Key Quick Guide #610019-1.02
10 www.glyphtech.com – © Glyph Technologies
Details
GT Keys load conveniently into the GT 205 chassis by means of a
flip-out handle at the front of the drive. The Key lock can be used to
prevent the removal of GT Key drives. The illustration below shows
four GT Keys in a GT 205 chassis.
Indicator Light on Chassis
• The power switch LED glows green to indicate that AC power is
applied: the GT 205 is plugged in and switched on.
Front Panel FireWire Port
LED: power to cartridge
LED: drive activity Drive latch flips out
for drive removal
FireWire/SCSI
Expansion port
Rear panel expansion
bay ports, SCSI or FireWire
Power switch
LED: power to chassis
GT Key drive
FireWire bay ports
(shown with AIT)
(bottom connectors)
(upper connectors)
Power switch with LED: AC power to chassis