GBC H925 - Manual (Page 6)

10 11
Do not take machine apart - no user servicable parts.
JAM ERROR
A) Open covers
B) Locate film jam
C) Press heat button
Use feed switch (forward/reverse)
to clear jam. It may be necessary
to cut and remove film. (Take care
not to damage rollers when
cutting film).
If cutting is required, use feed
switch (forward / reverse) to
re-feed film through machine.
Jam
Jam
FEED JAM ERROR
Remove document(s) and any debris
from feed tray. Fan documents and
adjust size guides. Turn main power
button, located on the back of
machine, off and on again.
Press “Start” to resume*.
Start Stop
3 mil / 75 mic 5 mil / 125 mic
Start Stop
3 mil / 75 mic 5 mil / 125 mic
Start Stop
3 mil / 75 mic 5 mil / 125 mic
(Alert LED)
(Alert LED)
(Alert LED)
HeatSeal Sprint H925 - Error Indicators TM ®
* For additional information to optimize performance see page 15.
Lamination Direction
If possible, always load documents
in landscape format. Top and
bottom film border is always
0.25”/ 6mm, and side film borders
will vary depending on document
size.
For recommended max document
length, see specifications, pg. 14.
For best lamination results, avoid
irregular shapes as shown below.
Menu Size / A3
11” x 17”
Letter Size / A4
11” x 8.5”
Legal Size
8.5” x 14”
11”
17”
(279 mm x 432 mm)
(432 mm)
(279 mm)
(279 mm x 216 mm)
(216 mm x 356 mm)
(356 mm)
(216 mm)
(216 mm)
(279 mm) 11”
8.5”
8.5”
14”
Letter=0.25”
A4=4 mm
0.25”(6.35 mm)
11.5” (292 mm)
1.5” (3.8 cm)
HeatSeal Sprint H925 - Loading and
Document Orientation
TM ®