GBC BM 200 Bookmaker - Manual (Page 42)

6
42
If feed errors occur, the feed belts needs to be cleaned or the pressure on the upper feed
belts needs to be increased. To clean the feed belts, see section 7, REMARKS Maintaining
Your Machine. To increase the pressure on the upper feed belts follow this procedure.
Open the top cover.
Place both springs in the upper position.
Close the top cover.
squarefolder fault codes
feed errors
Spring in normal position Spring in upper position
Trouble shooting
Trimmer fan missing
This message will be displayed when Trimmer fan not is in position or missing. Check that
the Trimmer fan is correctly positioned.
stacker full
This message will be displayed when the when the belt stacker on the Trimmer is full. Empty
the belt stacker. Open the Trimmer top cover and check that no set remains in the Trimmer.
Close the Trimmer top cover and continue hand feeding or press the start button on the
Collator to continue the job.
Trimmer fault codes, continues