GBC 61 Plackmatic Bookmaker - Manual (Page 21)

T10165 OPERATOR MANUAL BM 61
21
4.2.2 Operating the Booklet Maker OFF-line
Select manual or automatic start.
Manual start: Make sure that the time delay is set to minimum. Press the manual start
button for each operation.
Automatic start: The set will automatically be stapled as it is inserted in the Booklet
Maker.
When operating, insert one set at a time. Align the set with your fingertip. When auto-
matic mode is selected, set time delay to allow careful alignment.
NOTE: The manual start button will light up when the next set may be inserted.
1.
2.
4.2 Operation
4.2.1 Operating the Booklet Maker ON-line
Verify that the set up of the Booklet Maker is completed.
Select “third party output” on the Collator.
Press “calibration” on the Collator.
The set will enter the Booklet Maker and remain in the stapling section unstapled.
Verify that the set is completed/correct press the Collator start button. 1.
2.
.
4.
5.