GBC 2000 Plockmatic Bookmaker - Manual (Page 27)

27
2. Making Booklets
Close the Booklet Maker top cover. The message
“Finish set?” will be shown in the control panel.
There are now two choices:
Press the “Yes” button on the Booklet Maker.
The set will be finished and fed to the belt
stacker.
or
Press the “No” button on the Booklet Maker.
The message “Open cover and remove set”
will be shown in the Booklet Maker control
panel. Open the Booklet Maker top cover and
remove the set. Close the top cover.
Press the green button (B) on the Feeder/Collator
to start making booklets.
•
•
note
In either step, 4 or 6 above, instead of following the
calibration procedure you can:
Press the “Purge” button on the Feeder/Collator.
The set will be finished and fed to the belt stacker.
and/or
Press the green button (B) on the Feeder/Collator
to directly start making booklets.
•
•
B
On-line Mode, continues