E-flite Jenny JN-4 Slow Flyer 250 ARF - Manual (Page 9)

E-flite Jenny JN-4 Slow Flyer ARF Assembly Manual
 4. Slide the motor assembly into the fuselage.
 5. Slide the cowl back in position and attach it to the
fuselage. Attach the propeller to the motor following the
instructions provided with the motor.
 6. Position the motor so is does not rub against the cowl.
Apply a few drops of foam-safe CA to the intersection of
the fuselage and motor tube.
 7. Once the CA has cured, remove the propeller and
cowl. Apply foam-safe CA to the tube at the front of the
motor box.