E-flite Jenny JN-4 Slow Flyer 250 ARF - Manual (Page 3)

E-flite Jenny JN-4 Slow Flyer ARF Assembly Manual
Contents of Kit/Parts Layout
Large Replacement Parts
EFL1901 Wing (Top and Bottom)
EFL1902 Fuselage
EFL1903 Cowling
EFL1904 Tail Set
EFL1905 Main Landing Gear w/Wheels
EFLM1960 Carbon Fiber Tube, 6-inch (152mm),
8mm OD, 6mm ID: Park 250
Small Replacement Parts
EFLA213 E-flite/JR/Horizon Decals
Required Radio Equipment
You will need a minimum 4-channel transmitter, crystals, micro
receiver, and two sub-micro servos. You can choose to purchase
a complete radio system that includes all of these items or, if
you are using an existing transmitter, just purchase the other
required equipment separately. We recommend the crystal-free,
interference-free Spektrum ™ DX6 2.4GHz DSM
®
6-channel
system.
Complete Radio System
SPM2460 DX6 DSM 6CH Park Flyer
Alternate Radio System
SPM2710 DX7 DSM2 7CH System with AR6100 Microlite 6-
Channel Receiver
Or Purchase Separately
JSP30610 6-Channel UltraLite Rx w/o Crystal, Positive Shift
JR/AIR (72MHz)
JSP30615 6-Channel UltraLite Rx w/o Crystal, Negative Shift
Fut/HRC (72MHz)
JRPXFR** FM Receiver Crystal (JR only, not AR6000)
Or
SPM6000 AR6000 DSM 6-Channel Park Flyer Receiver
SPM6100 AR6100 DSM2 Microlite 6-Channel Receiver (must
be used with the DX7)
And
EFLRS60 6.0g Super Sub-Micro S60 Servo (2)