E-flite Jenny JN-4 Slow Flyer 250 ARF - Manual (Page 13)

1 E-flite Jenny JN-4 Slow Flyer ARF Assembly Manual
Radio Installation
Required Parts
• Assembled fuselage Sub-micro servo (2)
• Micro pushrod connector (2) • 2mm x 4mm machine screw (2)
• Micro pushrod connector backplate (2)
Required Tools and Adhesives
• Hobby knife • Phillips screwdriver
  1. Use a hobby knife to enlarge the outer hole in
the servo arm. Slide the micro pushrod connector into
the hole.
  2. Secure the micro pushrod connector using a micro
pushrod connector backplate.
  3. Mount the elevator servo in the fuselage using the
screws provided with the servo.
  4. Slide the elevator pushrod wire through the center hole
in the control horn. Place a small bend in the pushrod
wire to apply light tension to keep the pushrod wire from
popping out of the horn.