E-flite Odyssey EP Electric Glider - Manual (Page 4)

4
Radio Equipment
• 3 channels (minimum)
• 3 standard servos
• On/Off switch
• 6- or 7-cell sub-C battery
• 270-600mAh receiver-pack
You will need at least a 3-channel radio system with three servos
on an aircraft frequency for use in your Odyssey EP. A standard
radio system (4 channels with standard servos) will work fine.
Standard size servos will fit into the fuselage of the Odyssey EP.
A wood adaptor plate is provided for use with micro servos. A
micro switch to control operation of the electric motor is
also provided .
A 6 or 7-cell sub-C will be required for motor operation. The
battery fits under the wing.. A separate battery pack (270mAh to
600mAh) is required for the receiver.
Recommended JR ® System
• JR XF421EX System with 3 standard servos
Recommended Battery
• HAN9510 6-Cell1500mAh Battery
Optional Equipment
• EFLA102 Maxx 25 Speed Control W/Arm Switch
• HAN9512 Hi-Thrust Pack 800 7C Hump Ni-Cd
• HAN9511 Duration Pack 2400 6C Flat Ni-Cd
Additional Required Equipment
JR XF421EX
HAN9510
EFLA102