beautypg.com

Parts needed – E-flite Odyssey EP Electric Glider User Manual

Page 14

background image

The control throws listed below are a good place to start. After
you have become more comfortable with the flight performance
of the Odyssey, you can adjust the control throws to satisfy your
style of flying.

Elevator:

3

/

8

" UP

3

/

8

" Down

Rudder 1

3

/

4

" Right 1

3

/

4

" Left

Note: The control throw is measured at the point of the
control surface farthest from the hinge line. You can change
the control linkage attachment points in or out on the control
horns and/or servo arms to change the amount of throw on
each surface.

Parts Needed

• Fuselage
• Canopy

Step 1.Slide in rear canopy pin in pre-drilled hole in rear of the
canopy opening on the fuselage.

Step 2. Pull back the canopy lever on the top of the canopy and
place the canopy pin in the predrilled hole on the front of the
canopy area on the fuselage.

14

Section 7: Control Throw Recommendations

Section 6: Installing the Canopy