E-flite Cap 232 BP ARF - Manual (Page 36)

 5. Solder any necessary connectors onto the
speed control for the motor and battery. Plug the
motor into the speed control. Attach the speed
control to the fuselage using hook and loop tape.
Plug the speed control into the throttle port of
your receiver.
 6. Attach the battery to the side of the fuselage
using hook and loop tape. The exact position of
the battery can be changed forward or back,
depending on what is necessary to achieve the
correct center of gravity. Turn on the radio system
and plug the battery into the speed control.
Use the throttle to check that the motor
rotates counterclockwise when viewed from the
front. If not, follow the directions included with
your speed control to change the direction of the
motor rotation.
36