E-flite Cap 232 BP ARF User Manual

Page 14



2. Use a felt-tipped pen to trace the outline

of the fuselage onto the top and bottom of
the wing.



3. Remove the wing and use a hobby knife

with a sharp #11 blade to remove the
covering from the wing 1/16" (1.5mm) inside
the lines drawn.

Important:.Do.not.cut.into.the.underlying.wood..

This.will.weaken.the.structure.and.could.cause.

failure.in.flight..As.an.option,.you.can.use.a.

soldering.iron.or.hot.knife.with.light.pressure.

to.carefully.melt.the.covering.and.avoid.the.

potential.of.cutting.into.the.wood.