E-flite Ultra Stick 25e ARF - Manual (Page 3)

Introduction
Thank you for purchasing the Ultra Stick 25e. Designed
from the beginning for electric power, the Ultra Stick 25e
is developed from the popular Hangar 9
® Ultra Stick ™
series of aircraft. You will find most all of the hard work
completed for you. All flight control surfaces, control
horns, wheels, and other necessary items required to
speed up the building time have been installed at the
factory. You will find two sets of mounting holes on the
firewall to mount your choice of either the Power 25
or 32 Outrunner motors. An additional aluminum float
mount is included if you wish to fly with the optional
25-size Fiberglass floats (EFLA500A). The Power 32 is
recommended if you wish to fly with the floats. This is to
help maintain the CG required for flight. If you wish to
use the Quad Flap option you will need to use a receiver
battery to power the radio as the BEC unit in most speed
controls can only power 4 servos. All necessary control
linkage hardware is included for the Quad Flap option if
you choose to install it.
Specifications
Wingspan: 50 in (127cm)
Length: 41.5 in (105cm)
Wing Area: 480 sq in (31 sq dm)
Weight w/o Battery: 2.6 lb (1.2 kg)
Weight w/ Battery: 3.4 lb (1.5 kg)
Using the Manual
This manual is divided into sections to help make assembly
easier to understand, and to provide breaks between each
major section. In addition, check boxes have been placed
next to each step to keep track of each step completed.
Steps with a single circle (
 ) are performed once, while
steps with two circles (   ) indicate that the step will
require repeating, such as for a right or left wing panel,
two servos, etc.
Remember to take your time and follow the directions.