Watts LFHCW - Manual

SECTION A-A
A
A
.200 [5.1mm]
.235 [6.00mm] 1.000 [25.4mm]
.690 [17.5mm]
For Commercial & Residential Applications
ES-WBT-LFCorrugatedConnectors
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
Series LFFFSS and LF1FFSS Female Nut x Female Nut
A
Corrugated Water Heater Connectors
Features
• Available lengths: 12", 15", 18" and 24"
(305, 381, 457 and 610 mm)
• IAPMO Listed
Materials
• Brass nuts
• Stainless steel hose
Pressure — Temperature
Minimum bend radius: 2 1 /
2
" (63.5 mm)
Maximum Continuous Pressure: 125psi (8.6 bar)
Maximum intermittent impulse pressure: 180psi (12.4 bar)
Maximum Continuous Temperature: 160°F (71°C)
Maximum intermittent exposure: 180°F (82°C)
For use with water in accessible locations only.
Approvals
Certified by NSF to NSF/ANSI Standard 61
IAPMO Listed
Model LFHCW Model FMMA
A
A
A
1.0" [25.4mm]
.2" [5.1mm]
.7"
[17.5mm]
.235"
[6.0mm]
* The wetted surface of this product contacted by
consumable water contains less than 0.25% of
lead by weight.
LEAD FREE
*
ES-WBT-LFCorrugatedConnectors 1412 © 2014 Watts
USA: Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com
Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
A Watts Water Technologies Company
ModeL 3 to SubMit deSCriptioN diMeNSioNS
A
in mm
LFFFSS12 3 ⁄
4
” x 3 ⁄
4
” female, stainless steel 12 305
LFFFSS15 3 ⁄
4
” x 3 ⁄
4
” female, stainless steel 15 381
LFFFSS18 3 ⁄
4
” x 3 ⁄
4
” female, stainless steel 18 457
LFFFSS24 3 ⁄
4
” x 3 ⁄
4
” female, stainless steel 24 610
LF1FFSS12 1” x 1” female, stainless steel 12 305
LF1FFSS15 1” x 1” female, stainless steel 15 381
LF1FFSS18 1” x 1” female, stainless steel 18 457
LF1FFSS24 1” x 1” female, stainless steel 24 610
LF121SS12 3 ⁄
4
” x 1” female, stainless steel 12 305
LF121SS15 3 ⁄
4
” x 1” female, stainless steel 15 381
LF121SS18 3 ⁄
4
” x 1” female, stainless steel 18 457
LF121SS24 3 ⁄
4
” x 1” female, stainless steel 24 305
LFHCW 3 ⁄
4
” washer only See Line Drawing
LFFSSS12 3 ⁄
4
” x 3 ⁄
4
” female, sweat 12 305
LFFSSS15 3 ⁄
4
” x 3 ⁄
4
” female, sweat 15 381
LFFSSS18 3 ⁄
4
” x 3 ⁄
4
” female, sweat 18 457
LFFSSS24 3 ⁄
4
” x 3 ⁄
4
” female, sweat 24 610
Series FS Female Nut and Solder
Dimensions