Watts WQTSC-10 - Manual (Page 2)

FACTORS REQUIREMENTS
Maximum Total Dissolved Solids (TDS) 1,800 ppm
Iron, Maximum 0.2 ppm
Hardness (less than) 7 gpg
Hydrogen Sulfide 0.0 ppm
Manganese (less than) 0.05 ppm
Turbidity (less than) 1 NTU
pH 3-11
Minimum pressure 40 psi (2.8 bar).
Maximum pressure 100 psi (7 bar)
Models
Feed water guidelines
Proprietary replacement elements
Distributed by:
© Watts 2009 SS-WQCP-QTROSYS-0921
Watts Water Quality Products
800-659-8400 (press 2 for sales)
Western Region: 800-840-1688 (TGI Div.)
Email: [email protected]
watts.com
Metal Tank
11" x 14"
RO PRO ® Tank
Saves space, 9" wide!
A full assortment of Watts Top Mount Faucets are avail-
able in chrome, brushed nickel, bronze, white and black.
They may be used in air gap or non air gap installations.
Faucets with filter change
monitors are available to
provide quality assurance.
A Watts Water Technologies Company
Caution: Do not use where water is microbiologically unsafe or with water of unknown quality without adequate disinfection before or after the
unit. System must be maintained according to manufacturer's instructions. Note: Booster pump required if inlet pressure is below 40 psi.
MODEL NUMBER STAGE MEMBRANE
TANK
(4 GAL.)
FAUCET
TUBING SIZE
(TO FAUCET)
WQT4RO11-50PT 4 50 GPD RO PRO® None 3/8"
WQT4RO11-50MT 4 50 GPD Metal None 3/8"
PART NUMBER DESCRIPTION MICRON
RECOMMENDED
REPLACEMENT
WQTSC-10 Sediment cartridge 5 One year
WQTCBC-10 Carbon block cartridge 5 One year
WQTCM50-10 50 GPD TFC membrane Membrane Two years
WQTCGAC-10 GAC cartridge 10 One year
Two storage tank options Top mount faucets
Faucets sold separately allowing consumer to select the faucet of their choice!